Undertail exhaust ZX9R

Pretty sweet huh? :cool:

pretty cool. whos is it

pretty cool. whos is it dunno..found it on the net, alls I can tell is it's somebody overseas :D gasman should like this.. :thumbs:

:drool: :drool: Just give me a where and price!!!! That rocks!!!

look a lot better if they didn't have that serve'n tray for a plate :D

That is pretty sweet. Did you see how small the turn signals are on that. Pretty sweet. :)

I just finished my 2000 ZX-9R undertail. Check it http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35343534303B3434303B755962745A48595958505C61457A&size=max http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35333836323B3434303B755962745A48595958505C61457A&size=max

I just finished my 2000 ZX-9R undertail. Check it http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35343534303B3434303B755962745A48595958505C61457A&size=max http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35333836323B3434303B755962745A48595958505C61457A&size=max Kinda looks like a face w/ those taillights as eyes and the outlet pipe as the nose. Check out the tail on the first 9R. Has all types of scoupes.

Very cool. I wish I had the cash for a new exhaust. Even a slip on would be an improvement.

:welcome: simple guy Looks hot. :dthumb:

:welcome: Simple...that looks hott!

Thanks for the compliments. Anyone interested in how I did it check out this link Click here for the Data! (http://www.bikersoracle.com/zx9/forum/showthread.php?t=5471)

How is the heat back there?

Yeah and is there a trunk at all?

Kinda looks like a face w/ those taillights as eyes and the outlet pipe as the nose. to me it kinda looks like this :whistle:

to me it kinda looks like this :whistle: :lol:

No heat shield yet. I plan on using an aluminum sheet and bending it around the muffler then placing another sheet over it using 1/3" spacers to separate the two plates and mount the lower plate to the plastic around it. I'll use the space available, after installation of the second sheet, to put the tool kit and other stuff on. If I find some heat resistant filler material I'll place that between the two plates. And of course I plan on painting the plates flat black like the plastic. I'm also having the mid-pipe ceramic coated a dull titanium so once that's done I'll post pictures of the entire bike with everything on it or what I call the semi permanent look before the heat shield. :cheers:

As a past owner of a 9R..I think it is really cool! Definately not going to be many others out like that!

that pic looks like the IXIL exhausts.. which ive heard good things aobut quality, hich is funny cuz they are made in Mexico.

FINAL PICS ARE IN This pic shows how I mounted the plate PLATE (http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35353030363B3434303B755962745A48595F59505C61457A) THis pic show the finished product. FINAL PIC (http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35353030383B3434303B755962745A48595F59505C61457A&size=max)

I'm looking at the mid pipe... Yours is very out there and very visable... in the first post, how did he get that one so clean and under/behind the swingarm?

I believe with the IXIL pipes, they run under the bike... good for clearance at the track.... but not so sure aobut real life.. ie curbs and speed bumbs... but dont know since ive never seen it first hand or ridden it like that.

The pipe is a CBR1000RR Jardine RT-1 pipe for the 2004 undertail. The guy that created the midpipe did an awesome job. I just made sure the RT-1 muffler was very tight without melting the brake light cover. And after a 3 hour ride today the brake cover wasn't even hot. Here is another pic in the day light. ENJOY http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35353039303B3434303B755962745A48595F58545C61457A&size=max

Well what I'm saying is howcome you didn't run it under the swing arm pivit point? The newer bikes with undertail exhuasts have a notch out spot on the swingarm to accomedate the piping so it doesn't stick out... I'm not knocking your setup... just curious. I think it rocks and is really nice!

I didn't do it because of the bends requred to get the pipe from the header to the tail and ease of removal. Plus the room between the shock and swing arm was to tight for my taste. The other alternative was outside the swingarm so I took that route and it seems to work out well. :cheers:

Here is another pic in the day light. ENJOY http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35353039303B3434303B755962745A48595F58545C61457A&size=max Is that a center stand on your bike?

No center stand. It's just hid by the tire.

No center stand. It's just hid by the tire. That wasn't what I was talking about. :crazy: me, I was looking at the bottom of the rear shock but, didn't realize it till I Looked again just now.

Project Complete. Just finished the underseat trunk area. The only pic I didn't post is the one of the black cover that is velcrowed on to the end of the black plate that closes off the area you can see light through in the second picture (the bracket takes a 90 degree turn up to the trunk latch). Also in pic 2 you can see the brackets I used the mount the pipe better than the other pics I posted. http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35373631303B3434303B755962745A485B5A5B525C61457A&size=max http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35373631313B3434303B755962745A485B5A5B525C61457A&size=max http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35373631323B3434303B755962745A485B5A5B525C61457A&size=max

Kinda hard to see what it looks like from those pics... but congrads on your finished project!

Good point Gasman. Here are two more pic's that should tell the story. :cheers: http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35373635353B3434303B755962745A485B5B59505C61457A&size=max http://cs.kawiforums.com/cs/cs.display.asp?auth=31333237303B35373635343B3434303B755962745A485B5B59505C61457A&size=max

Ya that looks good! I applaud your craftmenship!

Sweet!!! Bike looks good dude! :dthumb:

Ya that looks good! I applaud your craftmenship! :withstupi

looks like a aftermarket kit for the exhaust... trunk looks great.

:dthumb: Looks great simple guy, thanks for posting the photos! While I like my D&D, I'm still pondering what, if anything, to do to mine. Food for thought.