Two Wheel Forums banner

Starter "slips" then makes loud clanking and grinding noise.

7K views 0 replies 1 participant last post by  DavyJon3s 
#1 · (Edited)
I took the bike out of the garage to prep for summer riding. Put fresh gas in, check everything over. Everything seems good. Flip the power, put in neutral, pull the clutch, press the starter. Engine turns over once or twice then it seems to "slips" and the engine stops everything. The starter motor still spins freely and I can hear, what sounds like, gears or pieces of metal slapping together. once it slips (for lack of a better term) ther eis no exhaust note or movement from the engine at all. any ideas?


Dave
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top