Support Road Racing and funding of airfence for racers - TwoWheelForum: Motorcycle and Sportbike forums
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 05-20-2006, 07:31 PM Thread Starter
V-Twin Moddin
 
Gas Man's Avatar
 
Join Date: Jul 2004
Location: SE Michigan
Posts: 38,916
Thumbs up Support Road Racing and funding of airfence for racers

I heard earlier this week that the Road Racing World Fund has finally ran out of money to purchase more Airfence.

This is a safety issue for the riders that we love to watch ZOOM around the track.

Roadracing World Action Fund is here to help.

What is Airfence you ask? Well this is it...



Quote:
How Airfence Works

David Swarts, Roadracing World & Motorcycle Technology

Published: April 24, 2002

The most dangerous aspect of an accident for motorcycle road racers is not the speed at which the accident occurs, but how the rider decelerates. Racers who can bleed off potential energy through a long slide into a grassy field are often able to continue with no more damage than grass-stained leathers. However, if that same slide is cut short by a steel or concrete barrier the rider will almost always be injured to some degree.

Although most new racetracks constructed in the U.S. are being built with proper barrier- free run-off areas for motorcycles, many older tracks have dangerous concrete walls, steel barriers or other unyielding obstacles in the impact zones. Traditionally in the U.S., riders have been protected from these impediments by haybales, or worse, nothing at all. Haybales, for such a low tech device, work admirably well but often the effort, expense and sheer volume of haybales required to properly protect a wall result in less-than-adequate protection, sometime with fatal results. Haybales do not do such a good job with multiple impacts, cannot be installed against a wall on the top of an oval (like at Daytona) and can create a traction hazard on the track if an impact explodes hay across the racing line.

Inflatable barriers, commonly known as Air Fence although that’s actually a trademark owned by Airfence Safety Systems (it’s sort of like calling “tissue” – “Kleenex” or “cola” –“Coke” even though those are trademarks) provide a far superior solution to haybales. Air Fence takes its name from the Australian-based Airfence Safety Systems, the latest incarnation of the company that developed the first inflatable barrier specifically for motorsports in 1991. Austria-based Alpina Safety Systems, once allied with Airfence Safety Systems’ predecessor, has its own version of inflatable air barriers, called Air Modules. Both companies' safety barriers are nearly identical, work in a very similar manner and are used by the world's leading motorcycle racing sanctioning bodies.

Air barriers are made from a heavy-duty, tear-resistant, fire-retardant, repairable PVC fabric that is designed to withstand multiple crash impacts and years of exposure to the elements. Front, back and interior wall sections in each module are inflated to slightly above ambient air pressure to give each air module shape, roughly 27 feet long, four feet high and four feet deep. The hollow space between these wall sections, the majority of the modules' volume, remains at ambient air pressure. The modules dovetail together so that a series of air barriers can be deployed to cover a long expanse of wall. Straps, similar to automobile seat belts, located at each end, tie multiple modules together end-to-end.

Like a permanent air bag for concrete walls, the air barriers are designed to gradually absorb the energy of a crashed rider. The rider’s deceleration is controlled by the release of air through control valves. The goal is to slow the rider to a stop gradually before the rider can make contact with the hard objects behind the module. After an impact the air barrier will recover its original shape and its impact-absorbing ability automatically. The re-inflation process is gradual and gentle so as not to eject a rider from the barrier.

Air barriers are tied securely, top and bottom, in order to keep the barrier from being displaced on impact. A skirt or flap, made from the same fabric as the module, is deployed from the lower front portion of the barrier and staked down to the ground to prevent crashed riders from sliding underneath the soft barrier. If the modules are deployed on a hard surface that prevents staking the skirt down, small-diameter, cylindrical sandbags are used to keep the skirt in place. Properly securing the air barrier prevents the air barrier from uncovering the wall if a motorcycle precedes the rider in the crash and helps prevent the barrier from moving into the racing line where it could create a hazard.

Airfence Safety Systems of Australia and Alpina Safety Systems of Austria make other soft barrier systems that can be used for motorcycle racing applications. Most of the other systems are designed for semi-permanent placement in one spot on one track. Inflatable air barriers, on the other hand, can be deflated, rolled up into a relatively small bundle, shipped from racetrack to racetrack or moved from location to location at a track as needed.

While it is not possible to eliminate risk from motorcycle racing, it is everyone’s responsibility to reduce risk wherever possible. If it is not possible to remove hard walls from impact zones, those hard walls should be insulated with the best possible protection. Currently, that is inflatable air barrier.


Check out the Testimonials from racers from around the globe!

What do they ask? To DONATE. Donate as little or as much as you can. And if you donate $25 you get a free T-Shirt. Heck we've all paid that for a t-shirt and it didn't support any good funds.

Still a skeptic. Check out the Crash Gallery. these racers lives could have been saved by the airfence!!

Again please check out the website to get all the info on this great charity.




-Chris
aka Gas Man



Was: 2002 Kaw ZX-9R
IS:


is me till the
Gas Man is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 05-20-2006, 07:36 PM
 
Join Date: Apr 2006
Posts: 662
Thats a great idea GasMan. Thanks for the link and the info!!
Gr1n1n is offline  
post #3 of 3 (permalink) Old 05-20-2006, 10:13 PM
 
Join Date: May 2005
Posts: 614
I can give a first-hand testamonial to how great these things work! I put a Cagiva Mito into one at Oran Park, (NSW Aust). The last turn before the straight has a steep downhill run into the braking area, then it dips into a steep uphill left hander. In the wet, coming down the hill, I hit the brakes. The rear end immediately locked up, and began drifting to the left. I released the rear brake, which got the wheel back in line, just in time to send me into the airfence at somewhere between 50-60Kmh at about a 30 degree angle. Me and the bike parted company, it bounced back towards the corner. I pretty much just laid there! I was able to climb over the airfence up onto the grass, with a set of crushed nuts being the only injury. I was racing again the next day. (more than can be said for the bike!)

These thing work, and if they're not being used at your local track, ask why not!

Chuckademus is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TwoWheelForum: Motorcycle and Sportbike forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome