ER-6n 650cc Kawi parallel twin - TwoWheelForum: Motorcycle and Sportbike forums
 
LinkBack Thread Tools Display Modes
post #1 of 16 (permalink) Old 07-01-2005, 10:27 PM Thread Starter
 
Join Date: Nov 2004
Posts: 5,314
ER-6n 650cc Kawi parallel twin

From a canadian site so american availability is qusetionable. Another light weight racer?

Specifications
ENGINE TYPE Liquid-cooled, 4-stroke Parallel Twin
DISPLACEMENT 649 cm3
FUEL SYSTEM Fuel Injection
FRAME TYPE Diamond, high-tensile steel
SUSPENSION, FRONT Telescopic fork
SUSPENSION, REAR Offset laydown single-shock


JK_DILLA is offline  
Sponsored Links
Advertisement
 
post #2 of 16 (permalink) Old 07-02-2005, 10:05 AM
V-Twin Moddin
 
Gas Man's Avatar
 
Join Date: Jul 2004
Location: SE Michigan
Posts: 38,916
That's pretty cool... a small cc street fighter???




-Chris
aka Gas Man



Was: 2002 Kaw ZX-9R
IS:


is me till the
Gas Man is offline  
post #3 of 16 (permalink) Old 07-02-2005, 12:49 PM
 
Join Date: Mar 2005
Posts: 149
Sweet looking bike. Why don't we get some of those test market bikes? It would be cool if you could at least order some of the overseas and Canadian models. It can't be that hard to make them US legal. Lets just hope it does well elsewhere so they bring it here.
Bandit 6S is offline  
Sponsored Links
Advertisement
 
post #4 of 16 (permalink) Old 07-02-2005, 01:00 PM
First 1000 Member
March 2008 BOTM Winner!
 
pickle.of.doom's Avatar
 
Join Date: Sep 2004
Location: Howell,MI
Posts: 4,183
It's not too hard, varies state by state, but defintely not a show-stopper if you really have your heart set on a Canadian model. I know I come across quite a few canadian model bikes here in MI, with MI plates on em.

pickle.of.doom is offline  
post #5 of 16 (permalink) Old 07-02-2005, 01:38 PM Thread Starter
 
Join Date: Nov 2004
Posts: 5,314
People used to inport canadian SVS and Z750's. Im sure these wont be hard. With some fairings, they may race head to head with SV's. I think i saw hp#'s in the 70 region. I'll look around.
JK_DILLA is offline  
post #6 of 16 (permalink) Old 07-02-2005, 09:44 PM
V-Twin Moddin
 
Gas Man's Avatar
 
Join Date: Jul 2004
Location: SE Michigan
Posts: 38,916
I agree with POD on this... I see canadian bike all the time here in Michigan!




-Chris
aka Gas Man



Was: 2002 Kaw ZX-9R
IS:


is me till the
Gas Man is offline  
post #7 of 16 (permalink) Old 07-03-2005, 03:20 AM
 
Join Date: Jul 2005
Posts: 1
Hi there.
The ER-6n is not for North America just yet. Its a slightly new direction (for Kawasaki at least) - they're trying to entice more newbies, older riders and ladies to give motorcycling a try. Its a slightly less intimidating machine (note the softer shapes than the current z1000 and z750 models) and since its a twin, should have more torque down low than the inline-4 models of similar displacement from the other Japanese manufacturers. I'd guess that it would compete favourably over here with the Honda 599 and Yamaha FZ-6. I'd love to do a shoot-out between this and the SV650 though.

You can read the whole press release here:
http://www.canadianstreetbike.com/in...id=27&Itemid=2

I'd be stoked if it were to become a North American model. Unfortunately, the Japanese manufacturers see less of a market in NA for most bikes that aren't cruisers or race-replicas. But that's another argument all together!

Thanks.
-Chris
Editor, CanadianStreetBike.com
canadianstreetbike is offline  
post #8 of 16 (permalink) Old 07-03-2005, 05:11 AM Thread Starter
 
Join Date: Nov 2004
Posts: 5,314
Hello! Thats exactly where i found this info, 'canadianstreetbike.com'. Nice site you got there.

JK_DILLA is offline  
post #9 of 16 (permalink) Old 07-03-2005, 10:10 AM
Moderator
Lifetime Gold Supporting Member
'07 Rally Veteran
 
jeeps84's Avatar
 
Join Date: Oct 2004
Location: Western N.C. (The Great Smoky Mountains)
Posts: 20,168
Send a message via MSN to jeeps84
I love that bike! I hope it makes its way to the US soon! Ill be waiting!

Submit your ride for the TWF Bike of the Month here


Currently ride 1987 GSXR 50, 1996 Ducati M900, 2005 GSXR 1000
jeeps84 is offline  
post #10 of 16 (permalink) Old 07-03-2005, 12:32 PM
V-Twin Moddin
 
Gas Man's Avatar
 
Join Date: Jul 2004
Location: SE Michigan
Posts: 38,916
Its definately a neat bike... what's the average going rate/price on one?




-Chris
aka Gas Man



Was: 2002 Kaw ZX-9R
IS:


is me till the
Gas Man is offline  
post #11 of 16 (permalink) Old 07-03-2005, 02:00 PM
First 1000 Member
March 2008 BOTM Winner!
 
pickle.of.doom's Avatar
 
Join Date: Sep 2004
Location: Howell,MI
Posts: 4,183
I love that blinker placement in the mini fairings...

pickle.of.doom is offline  
post #12 of 16 (permalink) Old 07-03-2005, 06:11 PM Thread Starter
 
Join Date: Nov 2004
Posts: 5,314
They deffinately want some of the SV market.... taken from motoring.co.za

Quote:
After a week of rumour and fuzzy "pirated" images Kawasaki has finally announced the launch of a radical new middleweight streetfighter it calls the ER-6n.

The name should give you clues about where it has come from: yep, it's the old faithful, parallel-twin engine from the ER-5 (and before that the GPZ500S), bored out to 649cc and fuel-injected through two 38mm throttle bodies.

But it does come in a really attitudinous chassis welded up from high-tensile steel tubing.

Kawasaki consumer products president Shinichi Morita said: "Our goal has always been to bring to market models in keeping with our heritage as a manufacturer of high-performance machines, something we will of course continue to do
'From 2006 we are also looking to expand our hard-core fan base'
.

"But, from 2006, we want to expand our hard-core fan base; the ER-6n is being released early to give you a taste of what you can expect from Kawasaki soon."

Its styling is outrageous by the standards of normally conservative Kawasaki, with the silencer under the engine like a Buell, an offset single rear shock and discreet pods for the (vertically mounted) headlights, clocks and fuel tank.

The swing-arm is made of elliptical steel tubing and has been narrowed by offsetting the spokes of the cast rear wheel and putting the rear disc brake inside it.

The brakes use petal-shaped floating discs all round with two hefty four-pot callipers in front and a dinky singl pot at the rear.

The bike is narrow, the seat low and the steering head angle steep this is going to be a hooligan tool of note
'The ER-6n is being released early to give you a taste of what you can expect from Kawasaki'
. Sources at Kawasaki SA mentioned a power output of 53kW, a little more than that of the rival Suzuki SV650 V-twin.
If weight has been kept down the bike should be a leading performer in its class.

It comes in two flavours the naked version you see here and a half-faired (probably less radical) layout, available with or without anti-lock brakes.

They're available in metallic yellow with a bronze frame, a superb silver on a purple frame and a black-on-bronze finish that looks mean just standing.

KMSA's Arnold Olivier told motoring.co.za the ER-6n would be available in South Africa in the last quarter of 2005 "definitely in time for Christmas".

Prices have yet to be set but Olivier hoped the base model would be significantly less expensive than Kawasaki's Z750S which sells for R68 995.

Kawasaki's media release is short on detail as usual the three important numbers - power, torque and weight - are missing but the rest is in our specification sheet
JK_DILLA is offline  
post #13 of 16 (permalink) Old 07-03-2005, 06:14 PM Thread Starter
 
Join Date: Nov 2004
Posts: 5,314
Kawasaki ER-6n specifications
motoring.co.zaJuly 1, 2004

Motor: Liquid-cooled four-stroke parallel twin.
Capacity: 649cc.
Valvegear: DOHC with four overhead valves per cylinder.
Power: 53Kw (estimated).
Induction: Electronic fuel-injection with two 38mm throttle bodies.
Ignition: Electronic
Starting: Electric.
Clutch: Cable-operated multiplate wet clutch.
Transmission: Six-speed constant-mesh gearbox with final drive by chain.
Suspension: 41mm conventional cartridge forks at front, offset single hydraulic shock absorber adjustable for preload at rear.
Brakes: Dual discs with four-pot opposed piston Tokico callipers at front, single disc with single-piston floating calliper at rear.
Price: When they get here.
JK_DILLA is offline  
post #14 of 16 (permalink) Old 07-03-2005, 11:21 PM
V-Twin Moddin
 
Gas Man's Avatar
 
Join Date: Jul 2004
Location: SE Michigan
Posts: 38,916
I think they're just NEATO!!!




-Chris
aka Gas Man



Was: 2002 Kaw ZX-9R
IS:


is me till the
Gas Man is offline  
post #15 of 16 (permalink) Old 07-03-2005, 11:59 PM
Moderator
Lifetime Gold Supporting Member
'07 Rally Veteran
 
jeeps84's Avatar
 
Join Date: Oct 2004
Location: Western N.C. (The Great Smoky Mountains)
Posts: 20,168
Send a message via MSN to jeeps84
This is a wide open market that Suzuki opened and all will most likely test the waters.

Submit your ride for the TWF Bike of the Month here


Currently ride 1987 GSXR 50, 1996 Ducati M900, 2005 GSXR 1000
jeeps84 is offline  
post #16 of 16 (permalink) Old 07-28-2005, 07:31 PM
 
Join Date: Aug 2004
Posts: 2,394
The silver one reminds me of the 1982 Suzuki Katana.
No Worries is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TwoWheelForum: Motorcycle and Sportbike forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome