Here's the reading part. Pics to come...
Suzuki GSXR1000 FI light fix
Take off the seat by removing the 2 screws just beneath it and disconnect the battery
Remove the nut and bolt holding the original connecting pipe to the frame on the right hand side of the motorcycle. Remove the nut and bolt holding the silencer to the pillion footrest mounting, and slide the silencer and connecting pipe from the motorcycle still attached by the valve cables. Remove the cover and completely disconnect the two cables at the valve end from the operating drum. Tie up the cables to so that they do not hang loose
Find the large grey ECU plug under the seat as shown in the photo. Find the brown/black wire which is plugged into the 8th hole from the left on the top row (when facing the rear of the bike) and remove it.
If you do not have a terminal removal tool then cut the wire and insulate both ends
If you do have a terminal removal tool, press down on the clip and disconnect the plug. Remove the orange cover and remove the brown/black wire. Insulate the terminal. Replace the orange cover and re-connect the plug
Re-connect the battery and replace the seat