|Topic Review (Newest First)|
|10-20-2006 01:14 AM|
No problem Rick.... glad to help..
|10-19-2006 05:28 AM|
|10-18-2006 11:47 PM|
|rickmancc||thanx 4 clearing that up gasman , that is what i meant|
|10-16-2006 08:37 AM|
NO I think he's saying the F4i replacement by barnett worked fine. Just that the 600RR stuff don't work on the f4i.
|10-15-2006 12:52 AM|
|jeeps84||So the Barnett didn't work either?|
|10-14-2006 09:09 PM|
|rickmancc||figured that the oem 600rr is not compaitable with the 01-03 f4i clutch the barnett clutch linked up ok|
|10-12-2006 02:40 PM|
|10-11-2006 03:01 PM|
|rickmancc||so far I found the plates to be a different heights so I ordered a barnett I will install it tonite, the basket is all ok|
|10-10-2006 01:45 AM|
|jeeps84||Check the basket and make sure it hasn't broken.|
|10-09-2006 08:04 PM|
I have no idea but its interesting...
|10-06-2006 08:40 AM|
|10-05-2006 05:21 PM|
f4i clutch installion
I have a simple question that should be easy. I was replacing the clutch on an 01 f4i today with the oem 03-06 rr clutch same oem part# not my first or second time replacing the clutch, but when I reinstalled the clutch cover, the clutch actuator seems like its not pulling the pressure plate, so I tok it all back apart and for *****s I re installed the old clutch and the same problem, is that correct? I am I missing something I have the factory manual and installed the plates in the correct order. but I should still notbe able to mover the actuator so easily with only the return spring giving me pressure. Let me know if any1 has ran across this issue.
Thanx 4 ur reply!