Two Wheel Forums banner
Cancel

a Slight Delay in SV Pay Off!!

3107 Views 52 Replies 10 Participants Last post by  R1up0n1, 
R
Well A slight delay in the SV payoff was caused by my dumb actions over the weekend.
I was in Maryland over the weekend at a friends house when we were heading out early in the morning to get some work done. I was backing out of his yard onto the driveway at an angle which there was a monsterous boat behind me that my buddy is fixing the fiberglass and floor on a customers boat.
I knew I was clear of the boat which I was looking over my right shoulder as I am backing up. Next thing I know I smashed into something! :cursin: I had no clue :wtf: I hit! I am scared to look! Well I get out and see the boat :scratch: ok I am clear of it.... :damn: I hit the trailor up by the hitch :cursin: and this is no little light duty boat trailor this thing is thick heavy duty!
We pulled the bumper out a little just enough for me to be able to put the tail gate down. Then I took the pics...but you can see how far the bumper went in and torqued.
I was going to work on getting the apperence project going on the truck next year, but not this soon...well looks like I have already started. First thing Monday morning I ordered a roll pan by Xenon.
I am going to get the dent out of the bed, then eventually I will get the side skirt kit which will cover that dent in the bed...it will be fixed but just the point being there will be some body filler right there.
I always hated that factory bumper :lol:
I'll have to post more pics once I get the roll pan installed. Then the side skirts, then the front airdam..I need to decide which kit I want to go with...so many options....
Here's the pics of the first accident of my truck..Enjoy...



See less See more
4
Reply
Save
Like
41 - 53 of 53 Posts
M
That doesn't sound like a bad rate to me. I was expecting a couple grrrr. Is this guy local here in Harrisburg, SV?

And damn...it seems like parting out a bike is a better idea than selling it whole?
Reply
Save
Like
R
marko138 said:
That doesn't sound like a bad rate to me. I was expecting a couple grrrr. Is this guy local here in Harrisburg, SV?

And damn...it seems like parting out a bike is a better idea than selling it whole?
Click to expand...
The guy is a racer, and he lives up near Pocanos (sp?) raceway. We met 1/2 way at the big Cabela's on the mountain near Allentown. So not too bad.

Parting out the bike is a way better idea then selling as a whole, however you need to have a bike that is in demand, other wise you will never sell your parts.
Reply
Save
Like
jeeps84
SVupON1 said:
Parting out the bike is a way better idea then selling as a whole, however you need to have a bike that is in demand, other wise you will never sell your parts.
Click to expand...
:iagree: not to mention yours had a blown motor.
Reply
Save
Like
R
I just got in my new Xenon roll pan for the truck. This one is really clean and it's like plastic made kinda like a rubbermaid container material. :lol: My last body kit I ordered for my 96 accord was complete trash..fiberglass...This one is a quality product. Next year I will be investing in the side skirts and front airdam after I choose which style I want to go with.
Here's some pics.

Front View

Side View

Rear View
I'll post more pics once I get it all painted and installed on the truck!
See less See more
3
Reply
Save
Like
E
Here is a good place for that roll pan/


http://chevytruckworld.tenmagazines.com/

:lol: J/kiddin it should look good.
Reply
Save
Like
R
Earlzach said:
Here is a good place for that roll pan/


http://chevytruckworld.tenmagazines.com/

:lol: J/kiddin it should look good.
Click to expand...
Those were the big Chevy Trucks in that link...mines a little sporty model.
:dthumb: thanks Earlzach :dthumb: :scratch: I wonder if I can get it put on this weekend!
Reply
Save
Like
Gas Man
That looks nice....
Reply
Save
Like
jeeps84
We don't care about no stinking truck parts. :wink: :lol: :lol: :whore:
Reply
Save
Like
M
:lol: :whore:
Reply
Save
Like
R
jeeps84 said:
We don't care about no stinking truck parts. :wink: :lol: :lol: :whore:
Click to expand...
Well...I started the thread with some damage...so I need to keep with the updates and progress..there will be more to come once it's all installed. :lol:
Reply
Save
Like
R
I got the fixing process started. I had my buddy pull as much of the dent out of the bed side this weekend. The bumper I could care less since I got the new roll pan in. We didn't have time to paint the roll pan this weekend, but I did get a chance to see if it fit. It does and looks really good.

Here are some pics of the dent he worked on. He also got the body line straightend out really well. The rest will be body filler and paint work.



See less See more
4
Reply
Save
Like
Gas Man
Don't look that bad... who's doing the body work and painting?
Reply
Save
Like
R
Gas Man said:
Don't look that bad... who's doing the body work and painting?
Click to expand...
My friend in Maryland is doing all the painting and body work. He is just so busy right now with his boat work. We will get to it sometime.
I just need to make sure it's before snow comes..because then he opens up his snow removal business with his big truck with a plow, salt spreader and dump bed on it. he's just always so [email protected] busy! + he still works on boats over the winter to.
I guess the man's gotta do what he's gotta do...he's got 3 kids, a wife and a house....plus he's got twins on the way...so that will be 5 kids! He's a busy mofo...and he won't let his wife work.
Reply
Save
Like
41 - 53 of 53 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Two Wheel Forums
A forum community dedicated to Motorcycle and Sportbike owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General Off Topic Technical Help, Maintenance & Tuning Mods and Aftermarket Yamaha All Other Sportbikes
Top