Two Wheel Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
73 Posts
a set of yosh stage 1 cams would be a good start. no need to change the valve springs with them. of course then you'll need adjustable cam sprockets and if you're not a proffessional DO NOT install yourself. have them degreed in and have a custom map dynoed in. should get you 8-10 horsepower. you can get a set of these cams from spaz 319-651-7729. He has the best deal on them. Or you can do a simple intake cam on the exhaust side and get a few extra ponies. :dthumb:
 

· Registered
Joined
·
73 Posts
he has one www.spazracing.com, but i dont think he keeps it updated. his business is pretty much word of mouth through dragracers. he's well known and respected in the dragrace world because of his advice and experience. he also does his own machine work and has his own head flow design with trade in of yours and his own custom grind cams if you wanna try it out but just like any kind of racing. horespower costs $$$$$, depends on how fast you wanna go :wink:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top