[flipmo]

What's up guys. Me and a friend were out yesterday messing around practicing come out of the hole quicker and we started burninig a little rubber. Well I left about a 35 foot mark then I went to do It again and nothing My bike is in gear the clutch is out and nothing its like its in neutral. I believe I burnt my clutche out. Do you think this is about right.

 

[Earlzach]

It never moved at all? Or your moving with more rev than go? All in all it sounds like clutch. :yikes:

 

[Gas Man]

I'm with Earl on this... sounds like a clutch! :yikes: :rant:

 

[flipmo]

I just went out to the shop and started up the bike and the clutch ingaged. Maybe it got too hot or something. I think I might change it out anyways.

 

[Earlzach]

I just went out to the shop and started up the bike and the clutch ingaged. Maybe it got too hot or something. I think I might change it out anyways.

Certainly. What you have done is glazed the steels. and this in turn is from friction plate heat. I would do the all steels and friction plates. You might consider heavier springs also if your going to continue with launching. :2cents:

 

[jeeps84]

Certainly. What you have done is glazed the steels. and this in turn is from friction plate heat. I would do the all steels and friction plates. You might consider heavier springs also if your going to continue with launching. :2cents:

:iagree: