[2wheeler]

Includes: (2) 1# silver bottles, solenoid, 12" braided line, 60" braided line - includes black loom, nozzle, switch, jets(28, 34, 36), and instructions. It's basically a Schnitz kit with 1 extra bottle, but no wiring(should cost $10-15 for the wiring at auto parts store)

Having a fuel controller is HIGHLY recommended.(Power Commander/Yosh EMS)

This kit will give you a 20, 30, 40HP power increase.

 

[GSXR1000DJ]

Includes: (2) 1# silver bottles, solenoid, 12" braided line, 60" braided line - includes black loom, nozzle, switch, jets(28, 34, 36), and instructions. It's basically a Schnitz kit with 1 extra bottle, but no wiring(should cost $10-15 for the wiring at auto parts store)

Having a fuel controller is HIGHLY recommended.(Power Commander/Yosh EMS)

This kit will give you a 20, 30, 40HP power increase.

Sounds sweet. Do you have any pics to post up as well and what price are you looking to get for the whols package??

Abd by the way. Welcome to TWF. Hope you enjoy and post away. :dthumb:

 

[2wheeler]

Ok, nice of me to forget to post the price on my FIRST classified post. DOH!! I will take $375 shipped to the lower 48. Thanks.

 

[Need4Speed]

Welcome to the site !!! :cheers: Is this the setup that you were using on your bike before and are upgrading, or is it brand new?

 

[2wheeler]

It is the same kit I use on my bike. This is a used kit a friend of mine had on his 954RR. This kit is very easy to install. The last one I did took me about 2.5 hours. :dthumb:

 

[Need4Speed]

It is the same kit I use on my bike. This is a used kit a friend of mine had on his 954RR. This kit is very easy to install. The last one I did took me about 2.5 hours. :dthumb:

sweet! how much of a wrench head do you have to be to install one of these beasts ?

 

[GSXR1000DJ]

sweet! how much of a wrench head do you have to be to install one of these beasts ?

Not to much of one. Between you and I, we can do it.

If you get some pics let me know and I will post them for you. :dthumb:

 

[2wheeler]

It's more wiring than anything, and there isn't even that much wiring. It is an easy afternoons work.

 

[GSXR1000DJ]

Let us know if you get some pics ready to post up. Would like to see it. I am interested in it.

 

[2wheeler]

Pic sent :cheers:

 

[GSXR1000DJ]

Here is the pic of the nitrous kit.

 

[2wheeler]

PRICE REDUCED = $350

Come on now, help a brother out!

 

[GSXR1000DJ]

Lets bring it down to $300. LOL

 

[2wheeler]

$300 shipped, w/1 bottle, and you have a deal.

 

[ScottSellersUNR]

man if this wasnt right before Christmas id have a Nitrous 176 RWHP Z

 

[ScottSellersUNR]

sounds like yourn ot gettign a lot of response.... if you have mem after new years let em now... ill take em

 

[2wheeler]

Still got em Scott. After New Years, let me know if you're interested. :dthumb:

 

[ScottSellersUNR]

Will do.

 

[ScottSellersUNR]

so it needs osme wiring... then does it spray at the injector with a secondary injector or is it drilled and injected at the throttle bodies? Also. on the ignition retarding, you need to get a nos controller for it or will a 20 shot not put much of a load on wearing the stock internals engine?????
I plan on doing the nos this year then next yearo nce warranty is gone im gonna tear the motor down at muzzys and cams and bore/stroke it with their 998 kit to give full displacement and 13:1 compression, that way im 155-165 at the wheel before its gased and 170-200 at the wheel gassed, plus i might be able to spray a 50 shot with the internals.

Does it take a mechinic to install ort just someone with decent skills with a drill and basic sense of mechanical skills? how bout electrical work, how complex?

 

[ScottSellersUNR]

fuel controller

i do hace a PC3 on the biek already, but was thinking for a 40 shot it will need a electronic timing retard as well (if not for lower shots as well)