Two Wheel Forums banner
1 - 2 of 2 Posts

· Banned
187 Posts
Discussion Starter · #1 ·

CF Nose Fairing: 748-998 Race

CF Nose Fairing: 748-998 Street

High quality pre-preg carbon reinforced with kevlar on the back side for strength and safety, the CF has a high quality polished finish that does not require paint yet is easy to paint because of the smooth surface. Large full pieces of CF are used and seams are hidden. Pre-preg carbon fiber parts use less resin because it is "cooked" under heat and pressure which results in a stronger and lighter product than typical wet-lay up carbon fiber. These pieces have very little resin and are thicker and more resilient so it has a much better chance of surviving crashes than wet lay-up carbon or fiberglass.
Sale Price: $499.99

CF Mono-Tail Seat: 748-998High quality Kevlar reinforced pre -preg CF mono tail. Made by the suppliers to DP.
Excellent fit and polished finish. Fits 748, 916, 996 and 998.
  • 748-996 with vents and tail light cut-outs
  • 998,998R,996R without vents with tail light cut-outs
  • 748-996 Racing tail with vents and no tail light cut-outs or rear key lock mount
  • 988,998R,996R Racing tail without vents and no tail light cut-outs or rear key lock mount
Sale Price: $499.95
List Price: $599.95

CF Swingarm Guard: 748-998 Race Style
Protect that expensive swingarm with a Kevlar reinforced pre preg carbon fiber cover made by suppliers to DP. Racing style has the built in lower chain and upper eccentric cover. The lower chain guard prevents your foot or fingers from getting caught in the chain and sprocket in case of a low side.
Sale Price: $139.00
List Price: $209.00

CF Swingarm Guard: 748-998 A simple kevlar reinforced pre preg carbon fiber cover. Made by the suppliers to DP.
The cover mounts to the holes on the top of the swingarm by sliding under the chainrub.
Sale Price: $79.00
List Price: $99.00

CF Exhaust Guard: 748-996 "SPS"
Pre-preg Carbon Fiber 'SPS style exhaust cover' : designed for the 748, 916, and 996. Mounting hole spacing is 130mm center- to-center. Fits the stock size heel guards. Made by a european supplier to race teams and a supplier to Ducati Performance. The finish is glossy and polished
Sale Price: $79.95

CF Sprocket Cover: Ducati
Lightweight pre-preg CF sprocket covers made by suppliers to DP in Italy. Fits all Ducatis 1991 and newer, including 750SS (except 97), 900SS, M600, M750 (except 97), M900, S4, 851, 888, 748,748S,916,996,996S,996SPS,998,749,999, 848, 1098, 1198, ST2, ST4.
Polished finish

Sale Price: $59.99

CF Tank Protector-Small: 748-998
Rectangular (trapezoid) pre preg CF buckle guard protects the back of the tank from scratches. Measures 9.5" long and 4" wide. High quality/ high gloss polished finish pre- preg constuction. Includes double sided tape to fasten to rear of tank. Covers the middle of the rear section.
Sale Price: $55.00

CF Fuel Tank: 748-998- Factory Painted
Quality pre-preg CF tank made in Europe by CM Composites- suppliers to major race teams and DP. Reinforced with aluminum for strength in key areas such as the cap, fuel pump and pivot. Fully lined with Kevlar. Beautiful flawless gloss finish. Full sheets are used to create hidden seam lines. Direct bolt-up and replacement fits 748, 916, 996 & 998. Uses stock fuel pump and standard hardware. Weighs approximately 4 pounds.

This is the racing version tank, it comes with an oversize billet gas cap that is anodized gold. The tank is painted by CM composites. This tank will require a breather tube with check valve which we have available. Otherwise it is a direct bolt on to s street bike.

This pre-preg carbon / kevlar tank is much stronger, lighter and more durable than a Kevlar or aluminum tank.
Sale Price: $1,999.00

· Banned
187 Posts
Discussion Starter · #2 ·
Carbon Fiber Belly Pan: 748-998 "SBK Style"

CF Belly Pan: 748-998 "SBK Style"

Shallow CF belly pan made by suppliers to DP.
*Pre-preg Carbon fiber fairing underside reinforced with kevlar edges
*Catches oil
*Extremely lightweight
*Excellent fit and polished finish
*Fits 748, 916 and 996 series
*Made by suppliers to DP.
*Does not include mounts or fittings.

Sale Price: $439.00
List Price: $539.00
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.