[bulldog]

okay tried to start it for first time today



oil is dropping at a moderate rate out of the exaust and there is like no oil in the block soooooooooo did it all fall out or is it in the cylander? ...... tomarow i am tgoing to drain the oil and take out the plugs to see if i can do anything



im not sure what to do ??????\





am i on the right track

 

[GsxrJack]

Bull, may have oil in the airbox that went into the intake valves...take the air cleaner off and look around for oil there....might be nasty cleaning all that up if its in the cylenders,,,,,,or maybe oil just went into the open valves and is in the cylenders when it was on its side...

my suggestion is to clean it up real good if its in the intake area, then take the spark plugs off and hit the starter to try to clean it out, then replace the spark plugs with new ones , add oil to the bike and try it again....

 

[jeeps84]

Bull, may have oil in the airbox that went into the intake valves...take the air cleaner off and look around for oil there....might be nasty cleaning all that up if its in the cylenders,,,,,,or maybe oil just went into the open valves and is in the cylenders when it was on its side...

my suggestion is to clean it up real good if its in the intake area, then take the spark plugs off and hit the starter to try to clean it out, then replace the spark plugs with new ones , add oil to the bike and try it again....

:iagree: Jack is sending you on the right path. :luck:

 

[Gas Man]

It is most likely that when he laid it down it must have thrown all the oil up thru the valves... like Jack said... spend the time on it and clean it up real good. Including the air filter... then complete the oil change on the motor and start it up... It's going to smoke like a bietcha and everything but as long as you have oil in the motor it's fine just burn that crap out...

 

[R1up0n1]

[email protected] thats hatein bull!! listen to GSXRJack

 

[jeeps84]

[email protected] thats hatein bull!! listen to GSXRJack

Its not that much work. Just lift the tank, clean the air box, get a new filter and plugs.

 

[bulldog]

Its not that much work. Just lift the tank, clean the air box, get a new filter and plugs.

ill try lol

 

[Gas Man]

Might want to take some pics as well and post them up here!