Two Wheel Forums banner

1 - 15 of 15 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
I am new to the motorcycle world. Can someone help me out by telling me what needs to be done when installing a full exhaust(Muzzy) on my Kaw ZX7R? Are the valves supposed to be adjusted?
 

·
Registered
Joined
·
955 Posts
abnds said:
I am new to the motorcycle world. Can someone help me out by telling me what needs to be done when installing a full exhaust(Muzzy) on my Kaw ZX7R? Are the valves supposed to be adjusted?
what year zx7?? carbs or fuel injected? thats what has to be adjusted not the valves...
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #3 · (Edited)
it's an 02 with carbs. I'm told I also need to buy a jetkit. Does this just consist of needles for the carbs (tring not to sound like an idiot)
 

·
V-Twin Moddin
Joined
·
38,916 Posts
GsxrJack said:
what year zx7?? carbs or fuel injected? thats what has to be adjusted not the valves...
All zx7's are carbed!

Yes, you SHOULD buy a jet kit...stage 2 at least. And if you're not ready or knowledgeable about carbs you need to find a shop to install it. The carbs will need to have the jets replaced with the jet kit and adjusted to your bike's needs. It would also be good to sync the carbs while they're being worked on, after the jet kit is installed!

Furthermore, you will love what the full exhaust and jet kit will do to your bike's performence!!! :dthumb:
 

·
V-Twin Moddin
Joined
·
38,916 Posts
yeah, they're going to tell you K&N filter as well. They aren't BS'in ya! You want more air in, more fuel in, and better exhaust out!! Get all that and you get more power!!!

Tim Allen.... GRUNT GRUNT GRUNT!!!
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #9 ·
They are going to do a before and after dyno run to see if there is an increase in hps also
 

·
Moderator , Lifetime Gold Supporting Member, '07 R
Joined
·
20,168 Posts
abnds said:
They are going to do a before and after dyno run to see if there is an increase in hps also
Way cool to have a shop with a dyno to do the work!:dthumb:
 

·
V-Twin Moddin
Joined
·
38,916 Posts
Yep, that's what WOS just got.

Go Brighton Super Bike!!!!

The owner and main tech has been doing race teams and mods for years. Has owned many race teams/bikes. And been the chief mechanic for many other teams. This guy knows his stuff. Now he's moved into the same place WOS meets for it's meetings. He's the one attempting to make Cale's TLR fast! :D
 

·
Moderator , Lifetime Gold Supporting Member, '07 R
Joined
·
20,168 Posts
Gas Man said:
Yep, that's what WOS just got.

Go Brighton Super Bike!!!!

The owner and main tech has been doing race teams and mods for years. Has owned many race teams/bikes. And been the chief mechanic for many other teams. This guy knows his stuff. Now he's moved into the same place WOS meets for it's meetings. He's the one attempting to make Cale's TLR fast! :D
I still have to drive 1 1/2 hours for a dyno or, about 45 minutes on the bike. :lol:
 

·
V-Twin Moddin
Joined
·
38,916 Posts
Yeah...about 45 mins for me to get that shop.... but no biggie!
 

·
V-Twin Moddin
Joined
·
38,916 Posts
Brighton Superbike was in.... Brighton, Michigan!!!

I personally never been to that shop but it was there... knew many people that had been there for some good work... even major medical on their engine!
 
1 - 15 of 15 Posts
Top