Two Wheel Forums banner
1 - 20 of 34 Posts

· Registered
Joined
·
1,397 Posts
Before you get the obvious answers what exactly are we looking at.
Ie.. Model of truck, Lift or no lift, Miles from a plank, stack of wood or nice embankment. Throw us a bone with this one. :scratch:
 

· Registered
Joined
·
1,216 Posts
Earlzach said:
Are you kiddin? :scratch:
:iagree: LOL

One thought that might work - are there any industrial areas with loading docks near you? Or, any hilly area that might be ok for you to back-up your truck enough to it to ride it on? Or even a deck if you could get your bike on to a deck, get truck up to it and then bike from deck into truck.

Be careful though, easy to drop bike without proper ramps. Is there anyone on this (or any other) forums your on that could let you use their ramps?

:luck:
 

· First 1000 Member, March 2008 BOTM Winner!
Joined
·
4,184 Posts
A hill is definitely the way to go... or even a ditch will work well. Just back into it with the gate down, and when the gate hits earth stop :D I have just a little two foot drop hill on the edge of my yard, and that works well enough to get a bike in or out. But think everything you are about to do through for a second, loading/unloading bikes into a truck is the #1 way that bikes hit the ground. I know I've done it, luckily there was 14 inches of snow for my bike to softly lay into as it went down. Thought my plan was a good one but didn't think it through all the way, lesson learned :D
 

· Registered
Joined
·
2,250 Posts
ShanMan14 said:
Subject says it all. I need to get it down to Birmingham for some work, but I don't know how to get it in the truck.

:cry:
another option http://www.uhaul.com/guide/?equipment=motorcycle rent it when u need it and return when your done...dont have to worry about storing it... wish I thought of this before I bought my tote
 

· Registered
Joined
·
357 Posts
Another option...

Hey Shan, if you know someone in the wrecker business, just ask them to bring a roll-back, aka flatbed, to your house, load it on the wrecker, then drop your tail gate, back up to the roll back, and slide your bike into your truck ! I am sure the shop your taking the bike to will have a means to unload it with !


:pat:
Steve.
 

· Registered
Joined
·
708 Posts
okay, This is what ya do. Get 2 sticks of dynomite. Place one stick under each tire of your motorcycle.You must have your truck positioned ready to go. Quickly lite the sticks of dynomite and hurry into your Truck and as soon as you hear an Explosion, put your Truck in reverse and drive approximatley 6 feet and stop. At this time just wait until the bike drops right into your Truck bed. Your now ready to tie it down and drive away. Good Luck!!!
 
1 - 20 of 34 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top