Two Wheel Forums banner
1 - 10 of 10 Posts

·
Banned
Joined
·
3,078 Posts
bolt here ...........screw there ..............its a pice of cake.......... naww idk i just never have seen it done?? :sorry:
 

·
Registered
Joined
·
4,335 Posts
What exactly do you mean by "integrator"?
 

·
Registered
Joined
·
7,333 Posts
DLITALIEN said:
How Hard/easy Is It To Install One Of These Jobs?

Is this for the rear or the front. I think I may have something for the rear if this is what you are looking for.
 

·
Registered
Joined
·
4,335 Posts
GSXR750DJ said:
Is this for the rear or the front. I think I may have something for the rear if this is what you are looking for.
I think he's talking about the taillight with the integrated turn signals. If that is the case, I answered him in another one of his threads. It's not much of a "kit", really. It's just another taillight that plugs directly into the stock harness. You have to splice one wire into each turn signal wire. REALLY simple to do. Cost is approximately $80 and you can buy them through SpeedWerks (they have a link here on the site).
 

·
Registered
Joined
·
7,333 Posts
Thats what I was thinking and just wanted to be sure. :dthumb:
 

·
Registered
Joined
·
17,886 Posts
Discussion Starter · #7 ·
it's called an intergrater kit at cycle gear. it's not a tailight but the circuitry you need to have your tailght be used with blinkers. i didn't know you could just pick up a new tailight and splice a couple of wires. if i don't get the undertail then i'm gonna get that. thanks people. :spam: <--only because no one uses it.
 

·
Registered
Joined
·
4,335 Posts
DLITALIEN said:
it's called an intergrater kit at cycle gear. it's not a tailight but the circuitry you need to have your tailght be used with blinkers. i didn't know you could just pick up a new tailight and splice a couple of wires. if i don't get the undertail then i'm gonna get that. thanks people. :spam: <--only because no one uses it.
Yeah, check with SpeedWerks on it, they'll have it to you in a few days. The pics in my thread do NOT do it justice. It's VERY bright. I think the stock undertail is fine if you can find a way to install a light and be legal. I'm going to take a couple measurements and then look at creating something that will look almost stock. I'll post pics whenever I get it done.

Oh, and people use the :spam: smilie, but those threads usually get locked/deleted because they truly are :spam: . ;)
 

·
V-Twin Moddin
Joined
·
38,916 Posts
The intergrators are simple to wire up! Then your tail light will be your blinker as well.
 

·
Moderator , Lifetime Gold Supporting Member, '07 R
Joined
·
20,168 Posts
Doesn't that bike have LED tail light?
If so it will take the whole light kit!
If its the old two bulb light, I have a kit!
 
1 - 10 of 10 Posts
Top