Two Wheel Forums banner

My new exhaust hanger

1769 Views 11 Replies 8 Participants Last post by  jeeps84
Well, I wanted to get rid of the passenger pegs, but the right side peg is also the exhaust hanger. I had searched on eBay several different times but could only find a hanger for the 02 and below R6 (they have them now, but they're over $40). So I decided to make my own. I bought a stock passenger peg/exhaust bracket off eBay and my brother cut off the peg mounting section (I wanted to keep mine in case I ever change my mind about taking passengers). I then cut the bottom off so there would just be one smooth line at the bottom. Next came a little sandpaper and bondo to fill in the cut marks. Then some primer and paint. No more passenger pegs!!

Here's a pic.
1 - 2 of 12 Posts
WOW capt... that looks great!!!!
Hey Cap, are you gonna paint the rear sets to match the hanger too or what? It looks pretty smooth in the pic.
That might look good!!!
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.