Two Wheel Forums banner

shift timing indicator light

2049 Views 24 Replies 7 Participants Last post by  DLIT
Hey Guys,

I'm trying to set my shift timing indicator light on my R6. I'm following my owner's manual, and I can't even get started. The manual says to push the RESET button to select one of the indicator light acitivity settings, but it doesn't mention whether the key should be in the "ON" or "OFF" position. I've tried both anyway and when I push the RESET button, nothing happens. What am I doing wrong? Anyone who has a R6 or is familiar with R6 settings, please help. Thanks.
1 - 4 of 25 Posts
Thanks DLITALIEN. I'll give it a try.
Sorry for the delay guys. I got it to work...just wanted to update that fact to you guys. Thanks people. Hey, I posted a new thread about sliders...please input your thoughts.
Yea you were right. The key had to be in the off position before pushing the RESET button. And the rest is pretty easy. It's pretty simple if I had just follow the manual explanation more carefully.
1 - 4 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.