Two Wheel Forums banner

Targa tank cover

1565 Views 10 Replies 7 Participants Last post by  CrunchieJD
I bought a targa tank cover off ebay but I don't see instructions on how to put it on. It is for a Honda F3 and is the velcro type. There is a black, rubber strap that is at the front of the tank cover going from on end to the other.

I do not know where that goes? It seems like it would go under the gas tank but I guess that would mean I would need to take off my tank to put it on?

If anyone has ever had one of these and knows how to put it on, I would appreciate your help.
1 - 2 of 11 Posts
Lay the cover on the tank. Pull the strap forward and roll it under the lip of the tank. I had to remove the bolts from the upper fairing to the gas tank to roll the strap. then attach rear of cover
I bought a cheap one (30.00) from Dennis Kirk and took it apart and used it as a template to sew a better one. I went to Jo Ann Fabrics and bought a thicker vinyl and better "shirt quality" flannel and made one myself. It fits better and is of higher quality than any I've seen...Maybe I should start takin' orders...?
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.